30/40/60トン自動蛍光錠剤ハイドプレス機FTP-X

FTP-Xシリーズは、全自動の 油圧プレス機 designed for precise tablet preparation in X-ray fluorescence (XRF) analysis. Available in 30T, 40T, and 60T models, it combines programmable multi-stage pressing, automatic pressure replenishment, pressure holding, pressure relief, and sample ejection in one compact system.

Designed as an automatic laboratory press, the FTP-X provides controlled pressing parameters and repeatable operating cycles for laboratories working with environmental, chemical, mineral, and materials samples. Its 7-inch touch LCD interface allows operators to directly configure mold diameter, sample pressure, supplementary pressure, and holding time.

高度な機能

• 30T, 40T, and 60T models for different XRF sample preparation requirements
• Five-stage programmable pressurization for controlled sample compaction
• Automatic pressure replenishment, timed pressure holding, and pressure relief
• 7-inch LCD touchscreen for direct parameter setting and operation
• 440C high-hardness die steel mold material with quench hardness of 85°
• 40–32 mm standard mold specification, with customized mold options available
• Adjustable ejection pressure according to application requirements
• Automatic sample ejection through the release function
• 100 mm high-strength aluminum oxide plate and 6 mm plexiglass protective door
• Cylinder limit protection with automatic pressure relief
• Automatic pressure relief when actual pressure exceeds the machine's maximum pressure
• Storage capacity for up to 10,000 historical operation records
• USB data export for external storage and process documentation
• 220 V, 50/60 Hz power supply

アプリケーション

The FTP-X series is designed primarily for preparing pressed pellets for X-ray fluorescence (XRF) analysis. It can be used in environmental, chemical, mineral, materials science, research, testing, and quality control laboratories.

The programmable pressing system helps maintain consistent pressure and holding conditions across repeated sample preparation cycles. Different mold configurations can also be supplied according to sample dimensions and application requirements.

商品詳細

High-Level System Settings

The FTP-X supports switchable English and Chinese operation interfaces, allowing operators to select the preferred language directly through the control system.

Mass Data Storage

The control system can store up to 10,000 historical operation records. Experimental data can be exported to a USB flash drive for external archiving and process documentation.

商品説明

楽器モデル	FTP-30X	FTP-40X	FTP-60X
圧力限界	0.3-30T	0.5-40T	1-60T
自動制御	Savtaインテリジェントプログラムは、5段階の加圧を制御するために使用されます。
圧力モード	自動圧力補充-時限圧力保持-自動圧力リリーフ
金型仕様	40-32mm (金型仕様はカスタマイズ可能)
保持時間	時間無制限（秒）
圧力変換	システムは自動的にサンプル圧力を変換します。
ディスプレイの使用	7インチLCDスクリーン（タッチスクリーン）
金型材料	440C高硬度ダイス鋼（焼き入れ硬度85）
セットアップ方法	タッチスクリーン操作は便利で速い
射出圧力	圧力は要求に従って置くことができる
リリースモード	リリースキー」を押すと自動的に金型が外れる
機器保護	100mm 高強度酸化アルミニウム板 +6mm プレキシガラス製ドア
シリンダーリミット保護	限界高さ以上のシリンダー自動圧力リリーフ
ホストの保護	実際の圧力が機械の最大圧力を超え、圧力開放プログラムが自動的に開始されます。
データ管理	10,000件の操作履歴を保存でき、Uディスクにエクスポート可能。
デバイス電源	220V (50Hz/60Hz)
シリンダーストローク	≤30mm	≤50mm
境界寸法	261×391×468mm	281×461×560mm	301×521×590mm
重量	100Kg	150Kg	180Kg

Core Operation Guide

セッティング

On the main operation screen, tap セッティング to configure the pressure value, mold type, sample diameter, supplementary pressure, and holding time. Multi-stage pressurization and pressure-holding cycles can also be configured before sample preparation.

デモールド

Trigger the demould function after the pressing cycle is completed. When the pressure exceeds the specified threshold or the cylinder reaches the limit switch, the machine automatically stops and relieves pressure. Manual screw-driven operation is also available.

データ管理

Tap データ管理 to review experimental parameters and operating timestamps. Stored data can be exported via USB drive.

加圧フェーズ

Within the settings menu, select 圧力フェーズ to configure up to five stages of segmented pressurization.

金型タイプ

The system supports round, square, and special-shaped mold configurations. Mold specifications can also be customized according to application requirements.

ダイ径

Enter the required sample diameter under the die-diameter settings. Save the selected parameters before starting the sample preparation cycle.

操作手順

01. Load the Sample

Open the cantilever of the hydraulic press and remove the die-press rod. Insert the funnel, load the sample into the chamber, and add boric acid around the sample.

02. Install the Die-Press Rod

Remove the funnel, insert the die-press rod, and gently twist it into position. Close the cantilever and ensure that it is firmly locked.

03. Set the Parameters

Use the touchscreen display to adjust the mold diameter, target sample pressure, supplementary pressure, and holding time. Multi-stage pressurization and pressure-holding cycles can also be configured.

04. Start the Pressing Cycle

Tap スタート to begin pressurization. Once the programmed pressure is reached, the system automatically completes the pressure-holding and pressure-relief sequence.

05. Eject the Sample

After the pressing cycle is complete, swing open the cantilever and remove the die-press rod. Insert the eject rod and press the リリース button to eject the pressed sample.

06. Remove and Clean the Pellet

Retrieve the finished pellet sample. Clean the mold and remove residual powder from the hydraulic press promptly after operation.

ヘンチを選ぶ理由

Hench Technology Co., Ltd., headquartered in Tianjin, China, supplies laboratory and industrial hydraulic pressing equipment for sample preparation and material testing applications. The FTP-X series combines automatic pressing control, programmable pressure profiles, automatic pressure relief, sample ejection, and data management in a compact laboratory system.

With 30T, 40T, and 60T pressing capacities and customizable mold configurations, the FTP-X can be adapted to different XRF sample preparation requirements while maintaining controlled and repeatable pressing conditions.