Máquina comprimidora automática de tabletas fluorescentes FTP-X de 30/40/60 toneladas
La serie FTP-X es una máquina de prensa hidráulica designed for precise tablet preparation in X-ray fluorescence (XRF) analysis. Available in 30T, 40T, and 60T models, it combines programmable multi-stage pressing, automatic pressure replenishment, pressure holding, pressure relief, and sample ejection in one compact system.
Designed as an automatic laboratory press, the FTP-X provides controlled pressing parameters and repeatable operating cycles for laboratories working with environmental, chemical, mineral, and materials samples. Its 7-inch touch LCD interface allows operators to directly configure mold diameter, sample pressure, supplementary pressure, and holding time.
Funciones avanzadas
- 30T, 40T, and 60T models for different XRF sample preparation requirements
- Five-stage programmable pressurization for controlled sample compaction
- Automatic pressure replenishment, timed pressure holding, and pressure relief
- 7-inch LCD touchscreen for direct parameter setting and operation
- 440C high-hardness die steel mold material with quench hardness of 85°
- 40–32 mm standard mold specification, with customized mold options available
- Adjustable ejection pressure according to application requirements
- Automatic sample ejection through the release function
- 100 mm high-strength aluminum oxide plate and 6 mm plexiglass protective door
- Cylinder limit protection with automatic pressure relief
- Automatic pressure relief when actual pressure exceeds the machine's maximum pressure
- Storage capacity for up to 10,000 historical operation records
- USB data export for external storage and process documentation
- 220 V, 50/60 Hz power supply
Aplicaciones
The FTP-X series is designed primarily for preparing pressed pellets for X-ray fluorescence (XRF) analysis. It can be used in environmental, chemical, mineral, materials science, research, testing, and quality control laboratories.
The programmable pressing system helps maintain consistent pressure and holding conditions across repeated sample preparation cycles. Different mold configurations can also be supplied according to sample dimensions and application requirements.
Detalles del producto
High-Level System Settings
The FTP-X supports switchable English and Chinese operation interfaces, allowing operators to select the preferred language directly through the control system.
Mass Data Storage
The control system can store up to 10,000 historical operation records. Experimental data can be exported to a USB flash drive for external archiving and process documentation.
Descripción del producto
| Modelo de instrumento | FTP-30X | FTP-40X | FTP-60X |
| Límite de presión | 0.3-30T | 0.5-40T | 1-60T |
| Control automático | El programa inteligente Savta se utiliza para controlar la presurización en cinco etapas | ||
| Modo de presión | Reposición automática de la presión-retención temporizada de la presión-alivio automático de la presión | ||
| Especificación del molde | 40-32mm (Las especificaciones del molde se pueden personalizar) | ||
| Tiempo de espera | Tiempo ilimitado (segundos) | ||
| Conversión de la presión | El sistema convierte automáticamente la presión de la muestra (aviso de sobrepresión) | ||
| Uso de la pantalla | Pantalla LCD de 7 pulgadas (táctil) | ||
| Material del molde | Acero para matrices 440C de alta dureza (dureza de temple 85°) | ||
| Modo de instalación | El manejo de la pantalla táctil es cómodo y rápido | ||
| Presión de eyección | La presión puede ajustarse en función de la demanda | ||
| Modo de liberación | Pulse la "tecla de desbloqueo" para retirar automáticamente el molde | ||
| Protección de los equipos | Placa de óxido de aluminio de alta resistencia de 100 mm + puerta de plexiglás de 6 mm | ||
| Protección del límite del cilindro | Cilindro por encima de la altura límite alivio automático de presión | ||
| Protección del anfitrión | La presión real supera la presión máxima de la máquina e inicia automáticamente el programa de descarga de presión | ||
| Administración de datos | Puede almacenar 10.000 registros históricos de operaciones y exportarlos al disco U | ||
| Alimentación del dispositivo | 220 V (50 Hz/60 Hz) | ||
| Carrera del cilindro | ≤30mm | ≤50mm | |
| Dimensión límite | 261×391×468mm | 281×461×560mm | 301×521×590mm |
| Peso | 100Kg | 150Kg | 180Kg |
Core Operation Guide
Configuración
On the main operation screen, tap Configuración to configure the pressure value, mold type, sample diameter, supplementary pressure, and holding time. Multi-stage pressurization and pressure-holding cycles can also be configured before sample preparation.
Desmolde
Trigger the demould function after the pressing cycle is completed. When the pressure exceeds the specified threshold or the cylinder reaches the limit switch, the machine automatically stops and relieves pressure. Manual screw-driven operation is also available.
Administración de datos
Tap Gestión de datos to review experimental parameters and operating timestamps. Stored data can be exported via USB drive.
Fase de presurización
Within the settings menu, select Fase de presión to configure up to five stages of segmented pressurization.
Tipo de molde
The system supports round, square, and special-shaped mold configurations. Mold specifications can also be customized according to application requirements.
Diámetro del troquel
Enter the required sample diameter under the die-diameter settings. Save the selected parameters before starting the sample preparation cycle.
Procedimiento operativo
01. Load the Sample
Open the cantilever of the hydraulic press and remove the die-press rod. Insert the funnel, load the sample into the chamber, and add boric acid around the sample.
02. Install the Die-Press Rod
Remove the funnel, insert the die-press rod, and gently twist it into position. Close the cantilever and ensure that it is firmly locked.
03. Set the Parameters
Use the touchscreen display to adjust the mold diameter, target sample pressure, supplementary pressure, and holding time. Multi-stage pressurization and pressure-holding cycles can also be configured.
04. Start the Pressing Cycle
Tap Inicio to begin pressurization. Once the programmed pressure is reached, the system automatically completes the pressure-holding and pressure-relief sequence.
05. Eject the Sample
After the pressing cycle is complete, swing open the cantilever and remove the die-press rod. Insert the eject rod and press the Publique button to eject the pressed sample.
06. Remove and Clean the Pellet
Retrieve the finished pellet sample. Clean the mold and remove residual powder from the hydraulic press promptly after operation.
¿Por qué elegir Hench?
Hench Technology Co., Ltd., headquartered in Tianjin, China, supplies laboratory and industrial hydraulic pressing equipment for sample preparation and material testing applications. The FTP-X series combines automatic pressing control, programmable pressure profiles, automatic pressure relief, sample ejection, and data management in a compact laboratory system.
With 30T, 40T, and 60T pressing capacities and customizable mold configurations, the FTP-X can be adapted to different XRF sample preparation requirements while maintaining controlled and repeatable pressing conditions.
