30/40/60-ton Automatic Fluorescent Tablet Hyd Press Machine FTP-X
The FTP-X series is a fully automatic hydraulic press machine designed for precise tablet preparation in X-ray fluorescence (XRF) analysis. Available in 30T, 40T, and 60T models, it combines programmable multi-stage pressing, automatic pressure replenishment, pressure holding, pressure relief, and sample ejection in one compact system.
Designed as an automatic laboratory press, the FTP-X provides controlled pressing parameters and repeatable operating cycles for laboratories working with environmental, chemical, mineral, and materials samples. Its 7-inch touch LCD interface allows operators to directly configure mold diameter, sample pressure, supplementary pressure, and holding time.
Advanced Features
- 30T, 40T, and 60T models for different XRF sample preparation requirements
- Five-stage programmable pressurization for controlled sample compaction
- Automatic pressure replenishment, timed pressure holding, and pressure relief
- 7-inch LCD touchscreen for direct parameter setting and operation
- 440C high-hardness die steel mold material with quench hardness of 85°
- 40–32 mm standard mold specification, with customized mold options available
- Adjustable ejection pressure according to application requirements
- Automatic sample ejection through the release function
- 100 mm high-strength aluminum oxide plate and 6 mm plexiglass protective door
- Cylinder limit protection with automatic pressure relief
- Automatic pressure relief when actual pressure exceeds the machine's maximum pressure
- Storage capacity for up to 10,000 historical operation records
- USB data export for external storage and process documentation
- 220 V, 50/60 Hz power supply
Applications
The FTP-X series is designed primarily for preparing pressed pellets for X-ray fluorescence (XRF) analysis. It can be used in environmental, chemical, mineral, materials science, research, testing, and quality control laboratories.
The programmable pressing system helps maintain consistent pressure and holding conditions across repeated sample preparation cycles. Different mold configurations can also be supplied according to sample dimensions and application requirements.
Product Details
High-Level System Settings
The FTP-X supports switchable English and Chinese operation interfaces, allowing operators to select the preferred language directly through the control system.
Mass Data Storage
The control system can store up to 10,000 historical operation records. Experimental data can be exported to a USB flash drive for external archiving and process documentation.
Product Description
| Instrument model | FTP-30X | FTP-40X | FTP-60X |
| Pressure limit | 0.3-30T | 0.5-40T | 1-60T |
| Automatic control | Savta intelligent program is used to control the five-stage pressurization | ||
| Pressure mode | Automatic pressure replenishment-timed pressure retention-automatic pressure relief | ||
| Mold specification | 40-32mm (Mold specifications can be customized) | ||
| Holding time | Unlimited time(seconds) | ||
| Pressure conversion | The system automatically converts the sample pressure (overpressure warning) | ||
| Display usage | 7 inch LCD screen (touch screen) | ||
| Mold material | 440C high hardness die steel (quench hardness 85°) | ||
| Way of setting up | Touch screen operation is convenient and fast | ||
| Ejection pressure | The pressure can be set according to the demand | ||
| Release mode | Press the "release key" to automatically remove the mold | ||
| Equipment protection | 100mm high-strength aluminum oxide plate +6mm plexiglass door | ||
| Cylinder limit protection | Cylinder above the limit height automatic pressure relief | ||
| Host protection | The actual pressure exceeds the maximum pressure of the machine and automatically starts the pressure relief program | ||
| Data administration | Can store 10,000 historical operation records, and can be exported to the U disk | ||
| Device power supply | 220V (50Hz/60Hz) | ||
| Cylinder stroke | ≤30mm | ≤50mm | |
| Boundary dimension | 261×391×468mm | 281×461×560mm | 301×521×590mm |
| Weight | 100Kg | 150Kg | 180Kg |
Core Operation Guide
Setting
On the main operation screen, tap Setting to configure the pressure value, mold type, sample diameter, supplementary pressure, and holding time. Multi-stage pressurization and pressure-holding cycles can also be configured before sample preparation.
Demould
Trigger the demould function after the pressing cycle is completed. When the pressure exceeds the specified threshold or the cylinder reaches the limit switch, the machine automatically stops and relieves pressure. Manual screw-driven operation is also available.
Data Administration
Tap Data Management to review experimental parameters and operating timestamps. Stored data can be exported via USB drive.
Pressurization Phase
Within the settings menu, select Pressure Phase to configure up to five stages of segmented pressurization.
Mold Type
The system supports round, square, and special-shaped mold configurations. Mold specifications can also be customized according to application requirements.
Die Diameter
Enter the required sample diameter under the die-diameter settings. Save the selected parameters before starting the sample preparation cycle.
Operating Procedure
01. Load the Sample
Open the cantilever of the hydraulic press and remove the die-press rod. Insert the funnel, load the sample into the chamber, and add boric acid around the sample.
02. Install the Die-Press Rod
Remove the funnel, insert the die-press rod, and gently twist it into position. Close the cantilever and ensure that it is firmly locked.
03. Set the Parameters
Use the touchscreen display to adjust the mold diameter, target sample pressure, supplementary pressure, and holding time. Multi-stage pressurization and pressure-holding cycles can also be configured.
04. Start the Pressing Cycle
Tap Start to begin pressurization. Once the programmed pressure is reached, the system automatically completes the pressure-holding and pressure-relief sequence.
05. Eject the Sample
After the pressing cycle is complete, swing open the cantilever and remove the die-press rod. Insert the eject rod and press the Release button to eject the pressed sample.
06. Remove and Clean the Pellet
Retrieve the finished pellet sample. Clean the mold and remove residual powder from the hydraulic press promptly after operation.
Why Choose Hench?
Hench Technology Co., Ltd., headquartered in Tianjin, China, supplies laboratory and industrial hydraulic pressing equipment for sample preparation and material testing applications. The FTP-X series combines automatic pressing control, programmable pressure profiles, automatic pressure relief, sample ejection, and data management in a compact laboratory system.
With 30T, 40T, and 60T pressing capacities and customizable mold configurations, the FTP-X can be adapted to different XRF sample preparation requirements while maintaining controlled and repeatable pressing conditions.
