.png)
.png)
Solid battery die HMN-PG
Solid battery die
The die material is made of PEEK and ceramic core, and the diameter can be customized as per requirements.
Product Description
| Instrument model | HMN-PG |
| Shelf material | 304 Stainless steel |
| Mold material | PEEK Insulating material |
| Indenter material | 3Cr13 Stainless steel |
| Sample size | Φ8, 10, 12, 12.7, 13, 20mm (d) |
| Die size | 50×90mm (M×L) |
| Size | 100×140mm (D×H) |
| weight | 2.5Kg |
Operating Procedure
-
Place the sample into the solid-state battery mold.
-
Assemble the battery mold and place it into the carrier. Tighten the nut.
-
Place the mold in the center of the hydraulic press to ensure the hydraulic orifice is ventilated.
-
Tighten the front knob to the right.
-
Swing the lever to apply pressure up to 1 ton, hold the pressure for 1 minute, then remove the mold.
-
Connect the air nozzle to the positive and negative electrodes for detection.
