.png)
.png)
Manual digital display button battery sealing machine YP-2NS
Manual digital display button battery sealing machine, small in size and light in weight, can be operated in a glove box.
Suitable for use with CR16, CR20, CR24 and CR30 battery cases.
Product Description
| Instrument model | YP-2N |
| Pressure limit | 0-2T (2-26MPa) |
| Piston diameter | Chrome plated cylinder 33mm |
| Massive structure | Integrated structure |
| Pressure gage | Digital display: 0.00-2.00T |
| Standard tooling | Standard CR20 series package mold |
| Sealing die | Optional CR16, CR20, CR24, CR30, etc |
| Sealing pressure | Generally between 0.8-1.2 tons |
| Remover mold | Optional CR16, CR20, CR24, CR30, etc |
| Stripping pressure | Generally within 0.4 tons |
| Size | 210×166×292mm |
| Weight | 12Kg |
Operating Procedure
-
Place the assembled button battery into the sealing mold of the sealer.
-
Tighten the oil drain valve of the sealer clockwise.
-
Move the handle lever back and forth to apply pressure.
-
The pressure will reach approximately 6–8 MPa (about 1000–1200 kg).
-
Loosen the oil valve counterclockwise to release the pressure and lower the mold back to its initial position.
-
Remove the sealed button battery from the sealer.
-
Place the tested button battery into the disconnecting mold.
-
Apply pressure of about 2–5 MPa to separate the sealed button battery.
-
Loosen the oil valve counterclockwise to release the pressure and lower the mold back to its initial position.
-
Remove the separated button battery from the sealer.
